Place the fabric-covered box compartment at the bottom of the tote to build suitcase dresser. Box compartment trays should be approximately 12 inches long and 3 inches, 5 inches wide. They look like cans, don’t have a lid and have pockets where you can place many accessories. You have the option to glue holes into the bottom of the suitcase or you can put them side by side at the bottom of the suitcase without adhesive to maneuver across the chambers. Fill out the trays with cosmetics, hair pins, and hair gel and hair brushes. Set suitcase on a dresser or desk, and make certain to keep it open so that the mirror is facing you and vertical while the attachment compartment rests firmly at the base.
How To Build Suitcase Dresser – If you want the classic appearance, then earn a dresser out of an old suitcase which you could pick up by a local flea market. By doing a suitcase dresser, you’re going to have the ability to transfer your dresser after travelling. It also creates a magical piece while sitting on top of a desk or even long, thin office.
To build suitcase dresser, add a hot glue stick on the rear of a glue gun. Connect the gun to a power socket and allow the paste to heat up for several minutes. Open the suitcase so the base of this suitcase is snug from the workplace and front cover is vertical suitcase. Squeeze limits paste on the back of a mirror or some large square handheld mirror. Press the mirror at the centre on the inside lid of the suitcase.
This post topic: Dresser